Installing a Standing-Seam Roof: Really a DIY Job?
If you’re seriously considering a DIY standing-seam roof installation, you’d best bone up on your general knowledge regarding what is undoubtedly a great roofing solution. While successful amateur installations are not unheard of, your surest bet is to seek the help of a professional. Standing-seam roofs are made of numerous interlocking panels, which run vertically from the ridge, or edge, of the roof to its apex at the eave. The seam where any two panels interlock is raised just above the surface of the roof, allowing water to run off the roof without it dripping in between the panels. This simple structure belies numerous details of installation that, if not properly attended to, can lessen the efficacy and lifespan of the roof.
Also, should you choose to hire a professional accomplished in the craft of roofing, you’re probably not going to find yourself looking at roof installation costs that are anywhere near as expensive as those of ordinary clay or fiber-glass shingle installation. Metal roofs in general and standing-seam roofs in particular are lightweight (between 1 and 2 pounds apiece), making them very easy to move around. They can also be installed over the old roof, which eliminates the time and manpower it might have required to tear the whole previous layer of roof off.
Properly installed, standing seam roofs are watertight, immune to the forces of wind and hail, fire retardant and require virtually zero maintenance aside from the odd hose-down every year or so. Indeed, they so improve the safety of your home that many insurance companies are willing to cut large amounts of money off the cost of their policies for homes with metal roofs.
If you’re intent on going through with your DIY standing-seam roof installation, however, here’s a few tips. You’ll probably want to lay down some kind of waterproof plastic membrane over the existing roof structure, followed by a good layer of roofing paper which will ensure that water stands no chance of making it through and into your home. Don’t neglect to fill in the roof’s valleys (the spaces between roof surfaces). Then you’ll need to cover the roof’s peak with a preformed ridge-cap, which you’ll need to get made to order unless you really intend to go into the roofing business professionally.
If your roof is irregularly constructed - with features like skylights, dormers or chimneys - then you need to reconsider what your goal is in doing this job on your own. In such cases, pre-made shingles just aren’t going to be enough to cover the entire roof surface. The irregular areas are going to require custom-cut shingles, and working with a saw and some chalk just isn’t going to be enough. What’s needed is hydraulic shear called a break, a portable device used by professionals to shape standing-seam panels on-site, a feat that would take a human ten times as long to replicate.
So maybe, on just this one occasion, it’s the time to loosen those fists and hand over the cash for a skilled roofer’s work. Indeed, if your worker as recommended by the manufacturer, or at least is recognized as qualified to install standing seam roof panels, it’ll mean that your roof is subject to warranty - and that you can look forward to fifty or more years of being secure in the knowledge that you’ve a strong roof over your head.
So maybe, on just this one occasion, it’s the time to loosen those fists and hand over the cash for a skilled roofer’s work. Indeed, if your worker as recommended by the manufacturer, or at least is recognized as qualified to install standing seam roof panels, it’ll mean that your roof is subject to warranty - and that you can look forward to fifty or more years of being secure in the knowledge that you’ve a strong roof over your head.
For more interesting articles on DIY Standing-Seam Roof Installation check out www.DurableMetalRoofs.com
- Ryan McCall
